BiogasBiogas
Biogas
Biogas
Biomass for biogas production is usually stored as silage. The same framework conditions apply here as for feed production. Nutrients and energy must be protected and losses reduced to a minimum. Fluctuations in the substrate quality disrupt gas formation and the methane yield decreases.
The special silage additives ProFerm and PlantaSil intervene here, ensure consistent substrate quality and protect against unwanted nutrient degradation. ProFerm promotes natural lactic acid fermentation and avoids fermentation errors.
The use of ProFerm is recommended when ensiling moist substrates (< 35% DS). PlantaSil already shifts the fermentation acid pattern in the silage towards acetic acid, which has a positive effect on the stability of the silage and the methane yield. PlantaSil is used with all sugar-rich substrates.
ProFerm / ProFerm HC is a biological additive, which contains specially selected homofermentative lactic acid bacteria. The special combination of different lactic acid bacteria effectively controls the run of fermentation and accelerates it. This results in a higher quality of treated silage and a minimization of the fermentation losses.
ProFerm
0,5 g ProFerm pro t silage
250 g per sachet, enough to treat 50 to or 70-85 m³ silage
Standard application (0,5– 2 l/t)
ProFerm HC
0,8 g ProFerm HC/ t silage
200 g per sachet, enough to treat 250 to or 350 - 425 m³ silage
Micro application (20 – 150 ml/t)
Dissolve a bag of ProFerm HC in 5 l of water whilst stirring constantly and pour it into the special tank.
20 ml of high concentrate per tonne forage are evenly sprayed on with a suitable dispensing technology (BioDos LD, BioDos ProfiLine).
Unused, dissolved product can be stored temporarily for up to 4 days in the refrigerator.
Careful examination has shown that our product, when used according to the directions for use, is suited for the recommended purposes. If biological silage additives are used, then the ensilage and removal technique has to be very good. Plant cultivation errors (e.g. cutting too late) and ensilage technique errors (e.g. compression and covering) cannot be compensated. We are liable for the consistent quality of the product, not for the risks of storage and use.
ProFerm is mixed with water and can be used immediately. The application amount depends on the type of applicator.
PlantaSil/ PlantaSil HC is a biological additive, which contains the specially selected, extra efficient working heterofermentative lactic acid bacteria Lactobacillus buchneri. Lactobacillus bucheri supports the natural lactic acid fermentation and simultaneously improves the aerobic stability of silages. Spoilage of silage, caused by yeasts and moulds are effectively inhibited. During fermentation the ratio of lactic acid to acetic acid will be switched to acetic acid. Therefore the gas building potential of the treated silage will be additionally improved.
PlantaSil
2,4 g PlantaSil/ t silage
240 g per sachet, enough to treat 100 t or. 140 - 170 m³ silage
Standard application (0,5 – 2 l / t)
PlantaSil HC
2,4 g PlantaSil HC/ t silage
600 g per sachet, enough to treat 250 t or 400 m3 silage
Standard application (0,5 – 2 l / t) as well as micro application (20 – 150 ml / t)
PlantaSil is mixed with water and can be used immediately. The application amount depends on the type of applicator.
Dissolve a bag of PlantaSil HC in 5 l of water whilst stirring constantly and pour it into the special tank.
20 ml of high concentrate per tonne fodder are evenly sprayed on with a suitable dispensing technology (BioDos LD, BioDos ProfiLine).
Unused, dissolved product can be stored temporarily for up to 4 days in the refrigerator.
Careful examination has shown that our product, when used according to the directions for use, is suited for the recommended purposes. The optimal storage duration of the treated silage is 4 - 6 weeks before opening. If biological silage additives are used, then the ensilage and removal technique has to be very good. Plant cultivation errors (e.g. cutting too late) and ensilage technique errors (e.g. compression and covering) cannot be compensated. We are liable for the consistent quality of the product, not for the risks of storage and use.
Ertrag
Erntezeitpunkt
Risiko
Siliermittel
Yield (to/ha)
60 - 90 to/ha
Time of Harvest
Risks:
Silage additive:
Yield (to/ha)
20 - 50 to/ha
Harvest:
Risks:
Silage additive
Yield (to/ha)
20 – 50 to / ha
Time of Harvest
Risk
Silage additive
Yield
5 – 10 to / ha
Time of Harvest
Risk
Silage additive
Yield (to/ha)
35 – 50 to / ha
Harvest
Risk
Silage additive
Yield (to/ha)
Depends on species composition, age of the plant and harvest year.
20 to 25 to/ha
Time of Harvest
Risks:
Silage additive
Yield (to/ha)
20 to 25 to/ha
Time of Harvest
Risks:
Silage additive